GD125
GD125 has an internal hot meltable adhesive lined, when heated, adhesive melts and flow to creat an excellent barrier to moisture penetration. The adhesive bonds to a wide variety of plastics, metals and rubber. Typical application is for sealing splices and wire/cable repair.
GD125 is available with shrink ration 3:1 and 4:1, High shrink ration makes it possible to cover wide range of substrates.
Features and application:
| Operating temp.: -55 ℃ to 125 ℃ | Voltage rating: 600V |
| UV resistant: (black) | Flame retardant: VW-1 (except clear) |
| Flexible | Shrink Ration 3:1, 4:1 |
| Min. full recovery temp.: 125 ℃ | RoHS & REACH compliant |
Typical technical performances:
| Property | Test method | Typical data |
| Tensile strength | ASTM D 2671 | 12Mpa Min. |
| Elongation at break | ASTM D 2671 | 300% Min. |
| Tensile strength after ageing | 158℃ 168hours | 7.3Mpa Min. |
| Elongation at break after ageing | 158℃ 168hours | 300% Min. |
| Voltage withstand | ASTM D 2671/AC 2500V, 1min | Pass |
| Dieslectric strenght | ASTM D 150 | 20kV/mm |
| Volume resistance | ASTM D 2671 | 1.0X1014.Ω·cm Min. |
| Adhesive | ||
| Soft point | ASTM E28 |
90+/-5℃ |
Dimensions:
D* = Inner diameter as supplied
d* = Inner diameter after fully recovered w(nom.)
W*=: Total wall thickness after recovered including jacket and adhesive A (nom.)
|
Prolink Part. No |
D/mm Min. |
d/mm Max. |
W/mm Total |
wire/cable diameter mm |
|
Shrink ration 3:1 |
|
|
|
|
|
GD125 3.0/1.0 |
3.0 |
1.0 |
1.00+/-0.05 |
1.2-2.8 |
|
GD125 4.8/1.5 |
4.8 |
1.5 |
1.00+/-0.05 |
1.9-4.4 |
|
GD125 6.0/2.0 |
6.0 |
2.0 |
1.00+/-0.05 |
2.5-5.5 |
|
GD125 9.0/3.0 |
9.0 |
3.0 |
1.35+/-0.08 |
3.8-8.6 |
|
GD125 12/4.0 |
12 |
4.0 |
1.65+/-0.08 |
5.0-11.0 |
|
GD125 18/6.0 |
18 |
6.0 |
2.10+/-0.10 |
8.0-16.0 |
|
GD125 24/8.0 |
24 |
8.0 |
2.40+/-0.10 |
11.0-21.0 |
|
GD125 30/10 |
30 |
10 |
2.40+/-0.10 |
12.5-27.0 |
|
GD125 40/13 |
40 |
13 |
2.50+/-0.10 |
18.0-36.0 |
|
Shrink ration 4:1 |
|
|
|
|
|
GD125 4.0/1.0 |
4.0 |
1.0 |
1.00+/-0.05 |
1.5-3.5 |
|
GD125 6.0/1.5 |
6.0 |
1.5 |
1.00+/-0.05 |
1.9-5.5 |
|
GD125 8.0/2.0 |
8.0 |
2.0 |
1.00+/-0.05 |
2.7-7.3 |
|
GD125 12/3.0 |
12 |
3.0 |
1.30+/-0.10 |
3.8-11.0 |
|
GD125 16/4.0 |
16 |
4.0 |
1.70+/-0.10 |
5.0-14.5 |
|
GD125 24/6.0 |
24 |
6.0 |
2.10+/-0.20 |
8.0-21.0 |
|
GD125 32/8.0 |
32 |
8.0 |
2.40+/-0.20 |
12.7-29.0 |
|
GD125 52/13 |
52 |
13 |
2.40+/-0.20 |
18.0-48.0 |
|
Special specification are available upon request. |
||||
