Spotlight
-
-
GT125
Very Flexible, General purpose, cost effective, Environment friendly heat shrinkable tubing
GT125 was made from Crosslinked Polyolefin. Attractive covering for both industrial and customer goods applications. Commercial grade tubing, Provides both insulation and protection of components and wires while also providing a smooth, glossy finish with various colors as well as clear.¥ 0.00立即购买
-
PHSS
Flame Retardant, Semi-rigid, Polyamide adhesive liner, Harness splice sealing heat shrink tubing
PHSS is specifically designed to meet automotive industry for environmental sealing and electrical insulation of automotive wire splices, terminations and components.
Semi-rigid jacket provides strain relief & abrasion protection of harness splices & mechanically sensitive components. Polyamide adhesive adhere to major types of automotive wire and perform well at an extended temperature range.¥ 0.00立即购买
-
PK150
Flame retardant modified fluoropolymer tubing, Flexible Kynar, 150℃, Shrink ratio 2:1
PK150 is for applications requiring high temperature resistance, outstanding abrasion and cut through resistance or superior chemical and solvent resistant properties. It reliably protects solder joints, terminations and connections against most industrial fuels, solvents and chemicals.¥ 0.00立即购买
-
PBC-S
Heat shrink insulated butt connector with internal fluxed solder ring
PBC-S incorporate a low-temperature solder ring, waterproof hotmelt adhesive ring, and a transparent heat-shrink sleeve. The solder ring and hot meltable adhesive ring will be melted when heating, to ensure reliable connecting and waterproof sealing for cable plices. easy-fast installation don’t require crimping, Widely used in automotive aftermarket, military, industrial, or commercial market automatic Feed Equipment¥ 0.00立即购买
-
-
-
CTS
Silicon Rubber Cold Shrink Tube
CTS is open-ended, tubular silicon rubber tube, which is expanded with removable cores. The core is removed after the tube has been positioned over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal.
Typical application is primary electrical insulation for all wire and cable splicing rated to 1 kV. Good for insulation, repairs and environmental sealing where space is limited and open fire can not be used..¥ 0.00立即购买
-
PWS
Wraparound sleeve with hot meltable adhesive
Made from modified cross-linked polyolefin, with a hot-melt adhesive liner. Upon heating, the sleeve shrinks and the adhesive melts, creating a water-tight bond between the sleeve and the cable. A corrosion proof metal channel is used to close the sleeve during installation. as insulation for splices upto 1kV and jacket repair for 36kV¥ 0.00立即购买
-
PHWC
Heavy wall heat shrink tubing
halogen-free, shrinkage ratio 3:1, co-extrusion with hot melting adhesive
Heavy walled, designed for using in a broad range of low-voltage applications. Particularly suitable for the insulation and protection of cable joints as well as cable repair. Co-extrusion adhsive line provides an excellent environmental seal and less longitudinal change after recovered.¥ 0.00立即购买
-
ERS
Two-components Epoxy cast resin for straight-through joint
Universally suitable for the connection of polymeric cables and conductors with PVC, PE, XLPE and EPR insulation: e.g. N(A)YY, CYKY,NYCY,NAYCWY,TT U0/U(Um)(kV) 0.6/1(1.2kV).¥ 0.00立即购买
-
-
-
PEA-CM
Tinned Copper Wire Mesh
PEA-CM is used in conjunction with medium and high voltage ground braids to provide shield continuity when splicing shielded power cables.¥ 0.00立即购买
-
PEA-EB
Flat tinned copper braid suitable for earth connection
PEA-EB electrical grounding braid is tinned copper wires woven grounding braid in a flat. For cast resin, heat-shrink and cold-shrink accessories, to provide a fault current path across shielded cable joints.¥ 0.00立即购买
-
PEA-AC
Armour Clamp
SUS304 stainless steel material, All edges are smoothed and chamfered, Hexagon screw head. Used for the earthing system of cable joint or termination.¥ 0.00立即购买
-
PEA-CFS
Non-Magnetic, Constant Force Spring equal to Raychem's EPPA-034 series
PEA-CFS made from fatigue resistant stainless steel which had been heat-treated and coiled.
Used for solderless shield and armour connections, Securing grade brades when splicing and terminating power cable.¥ 0.00立即购买
-
-
-
VFT
Void Filling mastic Tape
VFT is butyl rubber self-amalgamating sealing mastic, with excellent electrical properties, UV resistant. Idea for reinforcement of heat-shrink sealed areas for cable and conductor interstices, creates a perfectly watertight around connectors and armouring to prodive voild filling propuse.¥ 0.00立即购买
-
EMT
EPR Self-fusing, Medium Voltage Insulation Tape
EMT is self-fusing Medium voltage insulation tape. Idea of wire and cable insulation, Conductor insulation for plastic-insulated cables, Insulation and sealing for communication cable splices, pipeline protection remedy and water proof sealing.
EMT-20, EMT-30 suitable for different voltage grade for your reference to choose as spec.¥ 0.00立即购买
-
PMP
Dual layers with Polyolefin and mastic, water proof insulation tape
PMP is dual layer structure, one layer is made of mastic and the other is polyolefin. Typical application is protection and insulation sealing for different power cable termination and joints. Easy and fast to repair the damage surface of power cable and communication industry where waterproof are required.Provide reliable waterproof and insulation protection for mine,oil field and chemical plant where the fire can not be used.¥ 0.00立即购买
-
EMP
Dual layers with mastic and elastomer, water proof insulation tape
EMP is dual layer structure, one layer is made of mastic and the other is Elastomer. Typical application is waterproof, sealing and protecting for wire connectors. Use to repair cable jackets rapidly. And as the cable joints accessories widely used in heat shrink and cold shrink field.¥ 0.00立即购买
-
ABOUT US
Prolink Tek Co. Ltd focus on heat and cold shrinkable products, specilizing innovation solution for connecting, insulating, protecting and sealing for electronic, electric power and telecommunication markets
Electronic
Prolink's electronic product line ranges general application and special purpose application:
Material is including PVC, Polyolefin, PVDF, FEP and TFE
Shrink ration range from 2:1 to 4:1
Temp. range from 105 degree to 260 degree
Electric power
Prolink offers a full range of high quality heat and cold shrinkable products for the Electrical power industries including cable accessories for low voltage and medium voltage applications. Electrical insulation products are designed and tested to meet the most demanding requirements of IEEE, CENELEC as well as many other international standards for performance and long term reliability.
Telecommunication
Heat and Cold shrinkable products for broadband communications. Our innovative products prevent humidity ingress and mechanical damage to cables, splices and connectors. The application of heat shrink products in the communications industry including Cable joint and repair, Fibre Systems and Wire connector.
Contact Address：201, No. 326, Longyuan Road, Nanlian, Longgang, Shenzhen 518116,China
Website：www.prolinktek.com email：info@prolinktek.com
Copy right：Prolink tek Co., Ltd All rights reserved
