BITM
Medium wall heat shrinkable tubing for busbar insulation for 24kV
The BITM tubing is medium-walled, manufactured from a halogen-free based polymer, provides insulation enhancement and protection against flashover and accidentally induced discharge.
Typical application is to reduce air spacing between busbars, provide insulation enhancement and protection against flashover and accidentally induced discharge.
The BITM tubing is medium-walled, manufactured from a halogen-free based polymer, provides insulation enhancement and protection against flashover and accidentally induced discharge.
Typical application is to reduce air spacing between busbars, provide insulation enhancement and protection against flashover and accidentally induced discharge.
Features and Application:
1. Stabilized against UV rays
2. Halogen free
3. Excellent anti-tracking performance
4. Non-corrosion
5.Suitable for indoor and outdoor use
Available Color: Red-Brown
Technical Data:
| Property | Test method | Typical data | ||||||
| Tensile strength | ASTM D 2671 | 12.0Mpa Min. | ||||||
| Elongation at break | ASTM D 2671 | 500% Min. | ||||||
| Tensile strength after ageing | 120℃ 168hours | 10Mpa Min. | ||||||
| Elongation at break after ageing | 120℃ 168hours | 250% Min. | ||||||
| Dielectric strenght | IEC60243 | 18kV/mm Min. | ||||||
| Volume resistance | IEC 93 | 1.0X1013.Ω·cm Min. | ||||||
| Dielectric constant | IEC 250 | 3.0 | ||||||
| Flammability | IEC 4589 | 25 Min. | ||||||
| Copper stability | UL224 | Pass | ||||||
| Copper corrosion | UL224 | No corrosion | ||||||
Dimensions:
D* = Inner diameter as supplied
d* = Inner diameter after fully recovered
w=wall thickness after recovered
| Prolink Part. No | D/mm Min. | d/mm Max. | W/mm | Length per spool/m | ||||
| BITM 15/6 | 15 | 6 | 2.0 | 30 | ||||
| BITM 25/10 | 25 | 10 | 2.0 | 30 | ||||
| BITM 30/12 | 30 | 12 | 2.5 | 30 | ||||
| BITM 40/16 | 40 | 16 | 2.5 | 30 | ||||
| BITM 50/20 | 50 | 20 | 2.5 | 15 | ||||
| BITM 75/30 | 75 | 30 | 2.8 | 15 | ||||
| BITM 85/35 | 85 | 35 | 2.8 | 15 | ||||
| BITM 100/40 | 100 | 40 | 2.8 | 15 | ||||
| BITM 120/50 | 120 | 50 | 2.8 | 15 | ||||
| BITM 150/60 | 150 | 60 | 3.2 | 1.0-1.5 | ||||
| BITM 180/60 | 180 | 60 | 3.2 | 1.0-1.5 | ||||
| Special specification are available upon request. | ||||||||
