Home    Clod Shrink Product    CLB
CLB

CLB

Silicon Rubber Cold Shrink Breakout

CLB is silicon rubber breakout, which is expanded with removable supporting cores. The breakout will shrink down to a pre-determined diameter to create an environmental enclosure for individual cable phase legs and the overall cable jacket once cores removed.

Features and Application:

  1. Quick installation and accommodates a wide range of cable sizes
  2. Easy installation: Simply place break-out boot over prepared cable and unwind core to shrink into place (no force required)
  3. No torches or heat required
  4. Excellent resistance to ozone and ultra-violet radiation
  5. Good solvent resistance: Compatible with industry-approved cable cleaners
  6. Excellent thermal stability 
  7. High dry and wet insulation resistance
  8. Highly flexible; accommodates power cable supplier bend radius recommendations

 

Available Color: Gray, Dark Blue

 

Shelf life:

One and half years shelf life from the date of manufacture when stored in a humidity controlled storage (50F/10℃ to 80F/27℃ and <75% relative humidity)

 


Technical Date:

Property Typical Value Reference
Operating temperature -60~200 N/A
Hardness 37 Shore A
Tear Strength 40KN/M ASTM D 638
Tensile Strength 8.7 MPa ASTM D 638
Ultimate Elongation 680% ASTM D 638
Permanent Set 10%  
Dielectric Strength 25kV/mm  
dielectric dissipation factor 0.005  
dielectric constant 3  
Volume resistance 1016Ω·CM  


Dimensions:

No. of fingers Prolink Part NO. Dimensions (mm) as supplied
body fingers
2 fingers CLB 2-0 38 13
CLB 2-1 50 18
CLB 2-2 55 25
CLB 2-3 70 32
3 fingers CLB 3-0 55 13
CLB 3-1 60 18
CLB 3-2 70 25
CLB 3-3 85 32
CLB 3-4 (36kV grade) 95 38
CLB 3-5 (36kV grade) 105 45
CLB 3-6 (36kV grade) 120 50
4 fingers CLB 4-0 65 13
CLB 4-1 70 18
CLB 4-2 75 25
CLB 4-3 85 32
CLB 4-4 100 38
5 fingers CLB 5-0 75 13
CLB 5-1 85 18
CLB 5-2 95 25
CLB 5-3 105 32
CLB 5-4 120 38